Oil-mist filters VAU MT "KAMA 500 М"
Oil mist is an aerosol consisting of tiny droplets of oil or coolant (the coolant), formed in the process of turning, milling and other machines that use a coolant, as well as by heating the oil to high temperatures. The presence of oil mist in the air of the working place is hazardous because:
- Exposure to oil mist is unhealthy, while inhaled it accumulates in the respiratory tract and in the lungs;
- Depositing on process equipment and other surfaces, it forms oil-dust sludge. Especially susceptible to this effect are ventilation and air conditioning systems, forced cooling systems of equipment;
- accumulating on working surfaces, in units, control panels, etc., oil mist accelerates equipment wear and breakdowns, which increases operating costs;
- accumulation of oil and oil-dust sludge increases fire risk.
Use of appropriate aspiration equipment for oil mist in most cases decreases its ingress into the air of working areas. Connection of the unit to the protective casing of the lathe and milling machine dramatically reduces the ingress of oil mist outside the casing during operation.
APPLICATION:
Compact unit KAMA 500 M is designed for extraction of oil mist and fine suspended coolant droplets directly from the operating chamber of the lathe and milling machines.
The unit is installed directly on the milling machine and the receiving flange of the unit is connected to the counter flange of the machine casing by a flexible air duct.
The models come with low noise level, a 7-stage cleaning system including a HEPA 13 filter and a remote control panel with a fan speed controller.
STANDARD FEATURES:
Filter module includes:
- housing with door for quick access to filters;
- drain tap;
- receiving flange, 160 mm in diameter
- pre-separator with air diffuser plate;
- mist filter;
- set of intermediate self-cleaning;
- HEPA filter, cassette type (main);
- support legs.
The fan unit:
- unit housing with door and two windows for the discharge flange (air discharge down or sideways);
- discharge flange, plug;
- power efficient EC fan with adjustable speed;
- additional noise insulation of the fan compartment;
- remote control panel with "Start", "Stop" buttons and speed control.
BENEFITS:
- Compact dimensions and horizontal design allow mounting the unit on the machine casing with a minimum increase in overall height. This is important for areas where a crane beam is used;
- the speed control allows adjusting the unit performance for the specific task;
- multistage filtration system increases the service life of the replaceable filter;
- the main replaceable filter of the HEPA 13 cleaning class provides a high level of filtration and recirculation of the treated air back to the workshop;
- available in the customized color (matching the color of the main equipment).
SPECIFICATIONS:
Parameter |
Value |
Dimensions LхWхH (mm) |
1070х450х520 |
Weight (kg) |
65 |
Power absorbed max. (Wt) |
500 |
Delivery (adjustable) (m3/h) |
0-560 |
Cleaning class |
НЕРА 13 |
Noise level, max (dB) |
66 |
Nominal voltage (V) |
220 |
Fan speed, max (rpm) |
3 750 |
Receiving flange diameter (mm) |
160 |