VAU МТ "КАМА 1500 Н"
Ventilation-aspiration unit of modular type "КАМА 1500 Н" (VAUМТ "КАМА 1500 Н") represents compact attached unit with support frame. The model may be completed with two flexible aspirators with 3/5/7 meters area of effect (5 and 7 meters – overhung type).
APPLICATION:
Air cleaning with removal of dry, cohesionless mechanical substances: welding aerosol, metal particles, composite materials, abrasives, etc.
MODEL DESCRIPTION:
VAU МТ "КАМА 1500 Н" comprises fan with adjustable rotation speed and filter cartridge with automatic regeneration system. The unit is completed with the support frame, which rests against the floor. By this attachment at a height is made easier and the loads are reduced. The mounting height may be within the range of 2.7-3.5 meters. The attached control board is placed under the unit to ensure convenience of operation. Control panel is fitted with the rpm speed controller.
STANDARD FEATURES:
- Integrated energy-efficient EC-fan, equipped with rpm speed controller, soft starter, protector from overheating and voltage change;
- Control panel with push buttons "start", " stop" and speed governor (suction power);
- Support frame and bracket for wall mounting;
- Filtration element from polyester with PTFE-membrane of 25 m2, vertical arrangement;
- Inlet flanges of diameter 160 mm - 2 pieces;
- Prefilter –spark arrester;
- External tank- dust collector, volume 35 liters;
- Additional fan noise insulation;
- Air diffusion cover;
- System of filter regeneration by compressed air impulses, including filter reducer with manometer , receiver from stainless steel, analogue timer with manual impulse adjustment, air valve, air diffuser, condensate drain tap;
- Remote control board, with push buttons "start", " stop" , "manual regeneration", manual rpm controller , indicator «operation mode»
ADDITIONAL EQUIPMENT:
- Cantilever lifting-turning exhaust device of diameter 160 mm, area of effect 5 or 7 meters depending on the modification*
- Cantilever lifting-turning exhaust device of diameter 160 mm, area of effect 3 meters*;
- Additional cleaning block (for placing additional cleaning filters);
- Additional cleaning filter НЕРА 11/12/13;
- Integrated compressor in the cases when there is no compressed air connection;
- On-floor dust collector
*Note : all exhaust devices have hollow air ducts and external supporting structure , in case of the cantilever version partially combined with air duct. To make positioning of the receiving mouth easier , exhaust devices are fitted with gas struts and friction mechanisms of the increased radius.
SPECIFICATIONS:
Parameter |
Value |
Sizes , not taking into account support frame and exhaust devices LхWхH (mm)** |
830х730х1350 |
Weight not taking into account support frame, bracket and exhaust devices (kg) |
128 |
Weight with frame and support bracket (kg) |
281 |
Power absorbed min- max (Wt) |
150-1180 |
Delivery (adjustable) (m3/h) |
200-1500** |
Fan delivery max. (m3/hour) |
6 150 |
Maximum stack effect (Pа) |
2 400 |
Noise level, maximum (dB) |
77 |
Filtration class ( main filter) |
F9 |
Filtration area (m2) |
15 |
Nominal voltage (V) |
380 |
Fan revolutions, maximum (rev/min) |
4 000 |
Coating |
Powder coating |
Color by default ( color may be chose by the client) |
Dark-grey RAL 7016 |
Dust collector volume (l) |
35 |
Pressure of delivered compressed air (Pа) |
4,5-12*** |
**Not taking into account post-treatment filters
***Compressed air is required for operation of the filter regeneration system