Production table of multiple purpose
KAMA table comes as an ergonomic workstation with a table and a rear holed wall.
Fume is extracted both through the holes of the table and the rear holed wall. The table comes with special gates to regulate suction force in two directions. The holes on the back wall allow fixing: shelves, hooks, tool clamps. The distance between the holes follows the size of standard hooks with a center-to-center distance of 25 mm.
APPLICATION:
Welding, soldering and stripping operations.
STANDARD FEATURES:
- powder paint coating in any color at the request of the customer (by default RAL 7016);
- back wall extraction with a regulating gate. The holes on the back wall allow fixing of additional hooks, shelves, and other clamps for tools/fixtures;
- slide-out tray for coarse litter under the extraction table; the extraction table comes with a regulating gate;
- slide-out tool drawer;
- adjustable lags;
- two brackets with adjustable height and rotation angle to install lighting devices;
- gates to regulate suction through the back wall and holes above the litter tray;
Only for welding tables with a filter and exhaust module:
- stainless steel pre-filter/spark arrestor;
- slide-out dust tray;
- filter cartridge (polyester with PTFE membrane, area of 15 m2, filter class F9);
- automatic regeneration system of filters, including: stainless steel receiver, filter regulator, pneumatic valve, time relay and a condensate drain tap (to be connected to the compressed air supply system with a pressure at least 5 atm. or compressor optionally);
- control panel with controls and displays: fan speed regulator, button "Manual regeneration", "Start" and "Stop", display "Operation mode ";
- slide-out tool drawers
- two rotary LED lights with separate switch-on
- два поворотных светодиодных светильника с раздельным включением;
- socket 220 V
ADDITIONAL EQUIPMENT:
- led or fluorescent lamps;
- high-carbon steel or polypropylene table top plates;
- module of the ventilation and aspiration unit of the modular type "KAMA 1500", equipped with a filter with automatic regeneration and an EC fan with smooth speed control.
This version is a stand-alone device requiring no connection to the air duct system. The characteristics of the module correspond to the characteristics of the mobile unit VAU MT "KAMA 1500".
ACCESSORIES CAN ALSO INCLUDE:
Rotary table, slide-out drawers, desk mounted flexible exhaust device, switchgear, lighting, installation of integrated oil free air compressor, compressed air connector.
SPECIFICATIONS:
Parameter |
Parameter value |
table height |
up to 1 000 mm |
depth |
up to 1 100 mm |
length |
up to 1 800 mm |
air intake wall height |
as requested |
number of drawers |
up to 6 |
Lighting |
According to the technical specification of the customer |