VAU МТ "КАМА 500 ВВ"
Compact high-vacuum aspiration unit Is intended for cleaning air from mechanical and gaseous contaminants. The model is featured by its small compact sizes and the suction adjustment possibility. Due to the high stack effect one may use small-section intake air ducting avoiding significant loss of efficiency.
APPLICATION:
- Smoke extraction when performing soldering and welding works;
- aspiration of working space of the microlaser machining systems;
- operation in the capacity of exhaust unit for manual cutting grinding tools;
- and in the capacity of air cleaning and air delivery unit.
STANDARD FEATURES:
- installation section with the door , ventilation and filtration compartments;
- removable tray- dust collector;
- castor wheels;
- two build-in high-vacuum turbines;
- frequency regulator;
- control board with buttons for switching on/off the turbines and with the rpm speed controller;
- inlet and feed flanges of diameter 80 mm;
- pocket-scale filtration element from polyester with PTFE-membrane;
- activated carbon filter;
- intermediate filter;
- cartridge filter, purification class НЕРА 13
SPECIFICATIONS:
Description |
Value |
Efficiency , m3/hour |
0-500 |
Dimensions LxWхH (mm) |
660х565х980 |
Weight (kg) |
110 |
Power absorbed (Wt) |
2 600 (1300х2) |
Filtration class of standard equipment set |
НЕРА 11 |
Noise level, maximum (dB) |
70 |
Filtration area (main filters) (m2) |
108 |
Nominal voltage (V) |
220 |
Inlet /outlet flange diameter (mm) |
80 |